.png){kind=logo}
.jpg)
Fire Industry Training
Please select relevant course below
CPP20521 Certificate II In Fire Protection Inspection And Testing
CPP30821 Certificate III in Fire Protection Inspection and Testing
Pumps, Hydrants, And Water-based Fire Suppression Systems
Certificate II and above Pathway 1
Diploma and above Pathway 2
Fire Detection And Control Indicating Equipment
Common Units NSW FPAS Accreditation
BSB50920 Diploma of Quality Auditing
PUAFER003 Manage and Monitor Facility Emergency Procedures, Equipment and Other Resources
NON-ACCREDITED Fire Extinguishers And Fire Blankets Test and Inspect
Inspection And Testing Of Independent Smoke Alarms
CPPFES2010 Inspect and test fire hose reels
CPPFES2011 Install portable fire extinguishers, fire cabinets and fire blankets
CPPFES2020 Conduct routine inspection and testing Of fire extinguishers and fire blankets
CPPFES2021 Inspect, test and maintain fire extinguishers
CPPFES2026 Inspect and test emergency and exit lighting systems
CPPFES2035 Identify, inspect and test fire and smoke doors
CPPFES2037 Inspect and test fire hydrant systems
CPPFES2039 Identify, inspect and test passive fire and smoke containment products and systems
CPPFES2035 Identify, inspect and test fire and smoke doors
CPPFES2037 Inspect and test fire hydrant systems
CPPFES2039 Identify, inspect and test passive fire and smoke containment products and systems
The training and assessment rules for nationally recognised units/qualifications are available on training.gov.au. All registered training organisations develop their own training and assessment materials, which must meet these rules. When sourcing a training provider, it is always prudent to investigate whether the provider adheres to training package rules and standards for RTO’s 2015. Be aware that non-compliance may result in your qualification/certificate being cancelled, particularly where providers take shortcuts with assessment tasks. Axiom Compliance Learning adheres to the standards for RTO’s 2015, which is that we deliver quality training and assessment.
Duration
x4 days Zoom training or
Face to Face
Online study plus Industry Reporting 6 months to complete
$2,450
This Nationally Recognised Australian qualification applies to individuals who are, or training to be fire protection technicians responsible for non-trade installation and regular servicing of fire protection equipment and systems. The qualification provides fire protection technicians with the certificates to follow the pathway of “Qualified Accreditation” in some categories available under FPAS.This course is the current release 3.
Course requirements
Industry Work Performance: Records of inspection and testing activities completed on a prescribed number of sites and equipment. Industry-compliant service records, as per AS1851 completed 6 months prior to training, can also be submitted as evidence.
Extension available for $100- 2 monthsCPD points required by FPAS accredited practitioners can be achieved through this training.
CPPFES2037 Inspect and test fire hydrant systems
Duration
x1 Training session
Zoom or Face to Face
online study plus Industry Reporting 6 months to complete
$500
This Nationally Recognised Australian qualification applies to individuals who are, or training to be fire protection technicians responsible for non-trade installation and regular servicing of fire hydrant systems. This unit is the current release 1.This qualification provides fire protection technicians with the certificates to follow the pathway of licensing and accredited schemes in all states of Australia. This course covers routine inspection and testing activities per AS1851 for six months and yearly servicing of hydrant systems, excluding annual functional flow testing.
Course requirements
Industry Work Performance: Records of inspection and testing activities completed on a prescribed number of sites and equipment.
Industry-compliant service records as per AS1851 completed 6 months prior to training, can also be submitted as evidence.
Industry-compliant service records as per AS1851 completed 6 months prior to training, can also be submitted as evidence.
Learning Outcomes
• Interpret work instructions to plan and discuss service requirements with customers• Identify hydrant systems service requirements and plan for servicing• Identify potential and actual breaches of rules and regulations for service work• Select and maintain the appropriate tools required for servicing• Identify and implement control of hazards associated with work activities• Inspect & test fire hydrant systems following six monthly and yearly AS1851 service schedules• Identify and isolate pumps and other fire system interfaces• Identify and record system defects following regulatory and workplace requirements• Record test results following regulatory and workplace requirements.
Extension available for $100- 2monthsCPD points required by FPAS-accredited practitioners can be achieved through this training
CPPFES2021 Inspect, test and maintain fire extinguishers
Duration
x1 Day Face to FaceQLD / BYRON BAY plus online study 3 months to complete
Nationally Recognised Australian qualification. This unit is the current release 1.
Inspecting, testing and maintaining fire extinguishers.3 types: Water, foam, dry chemical, wet chemical.
Extension available for $100- 2 months CPD points required by FPAS-accredited practitioners can be achieved through this training
Inspecting, testing and maintaining fire extinguishers.3 types: Water, foam, dry chemical, wet chemical.
Extension available for $100- 2 months CPD points required by FPAS-accredited practitioners can be achieved through this training
Fire Detection And Control Indicating Equipment
Duration
x2 Days Face-to-Face
Online study plus Industry Reporting 6 months to complete
$720
CPPFES2029 Conduct functional tests on fire detection, warning and intercommunication devices
This Unit of Competency supports fire protection technicians responsible for functional testing of fire detection systems, specifying the outcomes required to complete routine yearly inspections, tests and preventive maintenance procedures to verify that fire detection, warning and intercommunication devices are functioning as intended, including working safely, isolating plant and interfaces, conducting compliance tests, visually inspecting, identifying non-compliance defects, fulfilling mandatory reporting requirements and resetting fire control and indicating equipment (CIE).
This is a compliant unit for Categories required for a “Qualified Accreditation” with the Fire Protection Association FPA NSW and Queensland QBCC Licence. This unit is the current release 1.
This is a compliant unit for Categories required for a “Qualified Accreditation” with the Fire Protection Association FPA NSW and Queensland QBCC Licence. This unit is the current release 1.
CPPFES2047 Inspect and test control and indicating equipment
This Unit of Competency supports fire protection technicians responsible for inspecting control and indicating equipment (CIE) and routinely testing their operational functions to ensure that fire alarm systems are working as intended – including the functionality of two fire suppression systems. This unit is the current release 1.
This is a compliant unit for Categories required for “Qualified Accreditation” with the Fire Protection Association FPA NSW and Queensland QBCC Licence.Following standards AS1851, AS1670.1, AS1670.4, AS2220.
Industry-compliant service records as per AS1851 completed 6 months prior to training, can also be submitted as evidence.
Prerequisite: CPP20521 Certificate II in Fire Protection Inspection and Testing. Extension available for $100- 2 monthsCPD points required by FPAS accredited practitioners can be achieved through this training
This is a compliant unit for Categories required for “Qualified Accreditation” with the Fire Protection Association FPA NSW and Queensland QBCC Licence.Following standards AS1851, AS1670.1, AS1670.4, AS2220.
Industry-compliant service records as per AS1851 completed 6 months prior to training, can also be submitted as evidence.
Prerequisite: CPP20521 Certificate II in Fire Protection Inspection and Testing. Extension available for $100- 2 monthsCPD points required by FPAS accredited practitioners can be achieved through this training
Thank you to our sponsors for this course
Ampac Fire Control Panels and Fire Systems Products
Common Units NSW FPAS Accreditation
Duration
Online study with
optional support via Zoom 3 months to complete
$520
This course provides Fire Protection Technicians with the certificates to assist in following the "Qualified Accreditation" pathway under FPAS NSW. These units are nationally accredited, achieving a statement of attainment, recognised throughout Australia by industry bodies, employers, and accreditation schemes. These units are the current release 1.Different states and territories may have regulatory mechanisms that apply. Students are advised to check for regulatory limitations.
Participants have access to support for this online course via ZoomIn addition- online tutorials, knowledge assessments, and practical exercises will be completed in the workplace
Participants have access to support for this online course via ZoomIn addition- online tutorials, knowledge assessments, and practical exercises will be completed in the workplace
Units of competency
CPPCMN2002 Participate in workplace safety arrangementsCPPFES2003 Safely move loads and dangerous goodsCPPFES2004 Identify and report on types of installed fire safety equipment and systemsCPPFES2006 Prepare for installation and servicing operations
Prerequisite: Participants must be currently working in the fire protection industry
Extension available for $100- 2monthsCPD points required by FPAS accredited practitioners can be achieved through this training.
CPPFES2020 Conduct routine inspection and testing Of fire extinguishers and fire blankets
Duration
Zoom or Face to Face training
Online study plus Industry Reporting 3 months to complete
$420
This Nationally Recognised Training Unit of Competency supports the requirements to conduct routine monthly, six-monthly, and yearly inspections and testing of fire extinguishers and fire blankets by following AS1851, AS2444, AS4265 AS1841.1, AS/NZS1850. This unit is the current release 1.
Course requirements- Industry Work Performance: Records of inspection and testing activities completed on a prescribed number of sites and equipment. Some of the required work performance evidence to complete this course is as follows: 10 fire extinguishers, including at least 1 of each of the following types: Water, Dry chemical, Carbon Dioxide, Wet Chemical, Foam.5 fire blankets across 2 separate buildings
Course requirements- Industry Work Performance: Records of inspection and testing activities completed on a prescribed number of sites and equipment. Some of the required work performance evidence to complete this course is as follows: 10 fire extinguishers, including at least 1 of each of the following types: Water, Dry chemical, Carbon Dioxide, Wet Chemical, Foam.5 fire blankets across 2 separate buildings
Extension available for $100- 2 monthsCPD points required by FPAS-accredited practitioners can be achieved through this training.
NON-ACCREDITED
Fire Extinguishers And Fire Blankets Test and Inspect
Duration
Zoom or Face to Face training, Online study plus Industry Reporting 3 months to complete
$420
This course supports requirements for routine-monthly, six-monthly, and yearly inspection and testing of fire extinguishers and fire blankets.
Best for individuals to perform inspections and tests internally, (within the company structure), assisting with cost-effective management of business compliance.
Best for individuals to perform inspections and tests internally, (within the company structure), assisting with cost-effective management of business compliance.
Course requirements
Industry Work Performance: Records of inspection and testing activities as per AS1851.Some of the required work performance evidence to complete this course is as follows:
Complete 4 (four) level 2 inspections on
- At least 2 Fire Extinguishers - At least 1 Fire Blanket - Pictorial Evidence of inspected equipment- Complete a Defect and Action Report- Complete a System Condition Report- Complete an Annual Fire Survey- Online knowledge assessment
Extension available for $100- 2 months CPD points can be achieved through this training
CPPFES2010 Inspect and test fire hose reels
Duration
Zoom or Face to Face training
Online study plus Industry Reporting 3 months to complete
$420
This Nationally Recognised Training Unit of Competency supports requirements to conduct routine monthly, six-monthly and yearly inspections and testing.This unit is the current release 1.
Course requirements
Industry Work Performance: Records of inspection and testing activities completed on a prescribed number of sites and equipment.
Industry-compliant service records as per AS1851 completed 6 months prior to training, can also be submitted as evidence.
CPPFES2035 Identify, inspect and test fire and smoke doors
Duration
Zoom or Face to Face training
Online study plus Industry Reporting 3 months to complete
$420
This Nationally Recognised Training Unit of Competency supports requirements to conduct routine inspections and testing of Fire and Smoke Doors, in accordance with standards AS1851, AS/NZS1905.1, AS6905.
This unit is the current release 1.
Course requirements
Industry Work Performance: Records of inspection and testing activities completed on a prescribed number of sites and equipment.
Industry-compliant service records as per AS1851 completed 6 months prior to training, can also be submitted as evidence.
Industry-compliant service records as per AS1851 completed 6 months prior to training, can also be submitted as evidence.
Extension available for $100- 2 months
CPD points required by FPAS-accredited practitioners can be achieved through this training
CPPFES2026 Inspect and test emergency and exit lighting systems
Duration
Zoom or Face-to-Face training Online study plus Industry Reporting 3 months to complete
$420
This Nationally Recognised Training Unit of Competency supports requirements to conduct routine inspections and testing of Emergency and Exit Lighting Systems in accordance with standards AS/NZ 2293, AS/NZ 2293.1, AS/NZ 2293.2, AS/NZ 2293.3This unit is the current release 1.
Course requirements
Industry Work Performance: Records of inspection and testing activities completed on a prescribed number of sites and emergency lighting.
Industry-compliant service records as per AS1851 completed 6 months prior to training, can also be submitted as evidence.
Industry-compliant service records as per AS1851 completed 6 months prior to training, can also be submitted as evidence.
.jpg)
Extension available for $100- 2months
CPD points required by FPAS accredited practitioners can be achieved through this training
CPPFES2039 Identify, inspect and test passive fire and smoke containment products and systems
Our course is designed to equip students with the necessary skills and knowledge required to identify, inspect and test passive fire and smoke containment products and systems, installed at a client's premises. Service activities are conducted in accordance with relevant codes and Australian Standards. It is worth noting that this course is recognised as one of the competencies required when applying for the FPAS-qualified accreditation test and inspect, as well as the fire safety assessment-qualified accreditation.
To assist students in their learning journey, Axiom Compliance Learning offers the expertise of highly skilled and motivated trainers and assessors with current industry experience.
These professionals create an interactive, engaging, and supportive learning environment.Students are required to perform on-the-job tasks by developing various documents, service reports and outcomes found in the industry.
To assist students in their learning journey, Axiom Compliance Learning offers the expertise of highly skilled and motivated trainers and assessors with current industry experience.
These professionals create an interactive, engaging, and supportive learning environment.Students are required to perform on-the-job tasks by developing various documents, service reports and outcomes found in the industry.
CPPFES2011 Install portable fire extinguishers, fire cabinets and fire blankets
This unit of competency specifies the skills and knowledge required to install portable fire extinguishers, fire cabinets and fire blankets at client premises.Installation activities are to be conducted in compliance with the requirements of relevant legislative, industry, customer and organisational requirements, including occupational health and safety (OHS) policies and procedures, relevant Australian Standards and the National Construction Code (NCC).
CPD points required by FPAS-accredited practitioners can be achieved through this training.Nationally Recognised Training-This unit is the current release 1.
CPD points required by FPAS-accredited practitioners can be achieved through this training.Nationally Recognised Training-This unit is the current release 1.
Inspection And Testing Of Independent Smoke Alarms
A short course that involves providing us with- job routine industry inspections & reports (we provide a template for you) and an online knowledge quiz.On completion, the participant will receive a certificate of achievement.
Note: Students are advised to check their state or jurisdiction regulatory licencing requirements before registering. Extension available for $100- 2 months
Note: Students are advised to check their state or jurisdiction regulatory licencing requirements before registering. Extension available for $100- 2 months
Our Students Say
CPPFES2020 Conduct routine inspection and testing of fire extinguishers and fire blankets "Very well structured in plain English, good explanations and very open for questions. Steve was very patient". 2023, Gary- NSWOur Students Say
CPP20511 Certificate 11 in Fire Protection Inspection and Testing "Just the right ratio of theory and practical learning. Tony was very clear when teaching each component of the course". Joshua - NSWOur Students Say
CPP20521 Certificate 11 in Fire Protection Inspection and Testing "Fantastic course, very engaging. Loved the use of videos to reinforce learning" Heather -Sydney.Our Students Say
CPP20521 Certificate 11 in Fire Protection Inspection and Testing “Steve was outstanding and extremely patient and helpful. Doing the course face-to-face, just made everything understandable, and I really enjoyed the whole experience. Will definitely recommend to others as required”. Gis QLDOur Students Say
Fire Safety Qualified Accreditation Pathway 1“I want to express my gratitude for your continuous guidance and support throughout my study process.” Wei WEI NSWOur Students Say
CPPFES2035 Identify, inspect and test fire and smoke doors, 2023 “Scott Ford was very informative and polite. The course was a good length, and questions were answered appropriately." Matthew Silva NSWOur Students Say
CPP20521 Certificate 11 in Fire Protection Inspection and Testing “Really enjoyed the course. A lot to learn, but the trainer Steve did a great job teaching the material. Very knowledgeable & all the theory came together and made sense through Steve’s excellent teaching style. Great job Steve Thanks”. Bernard QLDOur Students Say
CPP20521 Certificate 11 in Fire Protection Inspection and Testing “Overall, Axiom has been very helpful & informative. I appreciate the ability to be able to continue to ask for advice & information after the course is complete. The trainer Steven was an excellent presenter with an understanding and helpful demeanour”. Blake Sydney NSWOur Students Say
CPP20521 Certificate 11 in Fire Protection Inspection and Testing "Good to have a presenter; Steve, with industry background and informative discussion". Shannon - NSWOur Students Say
Online-CPPFES2020 Conduct routine inspection and testing of fire extinguishers and fire blankets. "I would like to extend my sincerest thanks to Nazmin for her guidance and support throughout my training. Nazmin was kind, considerate, and professional whilst encouraging me to proceed and complete my certification.I am grateful for her diligence in her role as a trainer/assessor and would not have been able to complete the course without her assistance. Nazmin was quick to offer extensions as required due to personal/work commitments and was able to explain what was required of me, step by step. She is a credit to your team". Troy NSWOur Students Say
CPP20521 Certificate II in Fire Protection Inspection and Testing "Completed our Cert 2 earlier this month in Byron Bay with Steve and had an overall great experience. We found the learning materials and environment easy to learn in/with. Steve’s experience in the industry also allowed us to gain a better understanding during our training. Would recommend". Zoe- Byron Bay NSW.Our Students Say
CPP20521 Certificate 11 in Fire Protection Inspection and Testing "Really enjoyed the training course last week. Any of the guys we take on board will be definitely sent to you and the Axiom team". Kyle- Geelong VICOur Students Say
CPP20511 Certificate 11 in Fire Protection Inspection and Testing "Tony is obviously passionate about his work and is one of the most experienced and knowledgeable trainers I have encountered across a number of different fields." Joe NSWOur Students Say
CPP20511 Certificate 11 in Fire Protection Inspection and Testing "Trainers that are passionate about the industry and their commitment to improving it by producing quality technicians via thorough training" Casper NSWOur Students Say
CPP20521 Certificate 11 in Fire Protection Inspection and Testing "Our Trainer Steve Millis engaged with all of us in a professional manner. I had a technical issue that we sorted out allowing me to be a part of the zoom meeting. Steve is skilled at sharing his experience and knowledge in a group environment. He is a great trainer"!! John S.A.Our Students Say
CPP20511 Certificate 11 in Fire Protection Inspection and Testing "The trainers put in much effort to explain stuff and made sure I fully understood". Douglas QLDOur Students Say
CPP20511 Certificate 11 in Fire Protection Inspection and Testing "Thank you so much. Appreciate the time and assistance throughout this course. Have a great week". Kind regards". Ari QLDOur Students Say
CPP20511 Certificate 11 in Fire Protection Inspection and Testing "I enjoyed the thorough knowledge and experience that my trainer Tony had, easy to communicate with, plenty of resources from the notes to reference from. Excellent training provider". Paul -QLDOur Students Say
CPP20511 Certificate 11 in Fire Protection Inspection and Testing "Tony is a very good trainer, the number in the class was small, which was great". David -NSWOur Students Say
CPP20511 Certificate 11 in Fire Protection Inspection and Testing "Trainer and information was awesome". Adam - NSWOur Students Say
CPP20511 Certificate 11 in Fire Protection Inspection and Testing "Thanks for all your help. You guys rock. Best Regards". Ronald W.A.Our Students Say
CPP20511 Certificate 11 in Fire Protection Inspection and Testing "The Axiom team was great to work with and helpful with every challenge we faced in a Covid 19 learning environment. I couldn't recommend them enough". Hugh -QLD